What is RoHS Certification?

RoHS stands for Restriction of Hazardous Substances. RoHS comes into effect on 1 July 2006. RoHS is a product certification which comes in restrictions of the hazardous substance in electrical and medical equipment to support security to the environment and health in the EU (European Union). The hazardous substance in the gear could be disposed of during waste administration process which could block numerous human and natural dangers. By following the rules laid by RoHS, hardware assembling firms confirm the wellbeing of their items additionally picking up buyer trust. RoHS additionally highlights measures to keep the unsafe substance from entering the items sometime down the road.

RoHS is stretching out its limitations to the new classification of gear emerging in the EU. It had made a reasonable commitment to an expanding piece of the pie of the European Union and giving a chance to reasonable exchange. A wide range of organizations, with the exception of merchants, should keep applicable consistency documentation for at least 10 years. RoHS certification can be applied by any of the metal industry for any purpose metal plating, chromating, anodizing or other finishes on EEE components, connectors or heatsinks. The RoHS mandate was received to confine the number of hazardous materials in the assembling gear. The purpose is to reduce the number of heavy metal poisoning incidents, and maybe even e-waste.

After July 1, 2006, all appropriate products required RoHS compliance in the EU market.

Also, check ——>> RoHS Certification in SriLanka

RoHS restricts the use of the following materials:

  1. Lead (Pb)
  2. Mercury (Hg)
  3. Cadmium (Cd)
  4. Hexavalent chromium (Cr6+)
  5. Polybrominated biphenyls (PBB)
  6. Polybrominated diphenyl ether (PBDE)
  7. Bis(2-Ethylhexyl) phthalate (DEHP)
  8. Butyl benzyl phthalate (BBP)
  9. Dibutyl phthalate (DBP)
  10. Diisobutyl phthalate (DIBP)

DEHP, BBP, DBP, and DIBP were added as part of DIRECTIVE (EU) 2015/863 which was published on 31 March 2015.

PBB and PBDE are flame retardants used in several plastics. Hexavalent chromium is used in chrome plating, chromate coatings, and primers, and in chromic acid.

The directive applies to equipment as characterized by a segment of the WEEE directive. The following numeric categories apply:

  1. Large household appliances
  2. Small household appliances
  3. IT & telecommunications equipment (although infrastructure equipment is exempt in some countries)
  4. Consumer equipment
  5. Lighting equipment – including light bulbs
  6. Electronic and electrical tools
  7. Toys, leisure, and sports equipment
  8. Medical devices (exemption removed in July 2011)
  9. Monitoring and control instruments (exemption removed in July 2011)
  10. Automatic dispensers
  11. Semiconductor devices

Benefits of RoHS Certification

  • Consumer safety
  • Consumer satisfaction
  • Prevention and elimination of hazardous substance
  • Prevents wastage of resources
  • Saves cost
  • The better market opportunity in the EU
  • The benefit of International stature to your product.

As more associations and nations are embracing the mandate, there will be less landfill sullying and harming cases. Overall, the advantages of RoHS compliance has not only affected the electronics industry but also produced solutions to electronic customers the world over.

Requirements of RoHS Certification

  • Conduct product testing
  • Monitor conformity compliance
  • Carry out inspections
  • Verify product safety
  • Take enforcement actions
  • Eliminate hazardous substance during the time of manufacturing
  • Internal auditing
  • On-site testing

Also, check ——>> RoHS Consultant in SriLanka

How to Get RoHS Certification

To make the RoHS Certification process simple. You should hire a consultant when a consultant received your application they will guide you and your business through the following steps.

  1. Testing
  2. Process Audit
  3. Documentation Review

The Technical File must contain the following:

  • General product description and design structure information
  • Risk assessment of materials, parts, and subassemblies
  • Conformity information on materials, parts, and subassemblies
  • Manufacturing documentation and records
  • Harmonized standards, specifications, and conformity procedures

4. Certification Statement


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s